Manufacturers:Hydrotech Membrane Corporation

Jump to: navigation, search

Manufacturers:Hydrotech Membrane Corporation

Revision as of 18:56, 29 January 2026 by James Klassen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)



Division C - Accepted Materials


Hydrotech Membrane Corporation
Associate Member (Manufacturer)

Materials Listed by Category under Tabs Above


The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Website
http://en.hydrotechmembrane.ca/
Contact Address
See the current Membership list and contact information at www.rcabc.org
Country of Origin
U.S.A.
Country of Manufacture
U.S.A.
Year First Installed
BC:
Canada:
Foreign:

Hot Fluid-applied Rubberized Asphalt Membranes


Hot Fluid-applied Rubberized Asphalt Membranes


Extensive VR System (sedum tile).jpg


Wind Resistance

Consult the manufacturer for reports or letters of assurance


* System is designed for a protected membrane roof assembly, also known as an inverted roof assembly.
** Semi-intensive, Intensive, and Hybrid (blue-green) vegetated roof systems are only permitted on protected membrane roofs (PMR); see Sentence 1.1.3.2.(5) in the RGC Standard for Vegetated Roofs. Any deviation to the "RGC Standard for Vegetated Roofs" must be made by submitting a request to the RGC for a written Variance, as defined in Article 1.1.3.6.

Home

© RCABC 2026
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.