Materials:ProMatrix (Siplast)

Division C - Accepted Materials

ProMatrix (Siplast)
by Siplast, Inc. (A Division of GAF Materials Canada ULC)

Material Acceptance and Product Details The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
Manufacturer Siplast, Inc. (A Division of GAF Materials Canada ULC) Accepted for the RoofStar Guarantee Program June 11, 2026 Accepted for application in Waterproofing Roof Systems Grade-level Waterproofing Systems Acceptance Criteria None (See Section 12.2. in the RGC Standards for Waterproofing Roofs and Grade-level Waterproofing) Product Summary Pro Matrix Resin is a fast curing, fibrated PMMA resin flashing compound intended for specialty flashing applications where application of fleece-reinforced Parapro 123 flashing resin is impractical due to flashing configuration. Pro Matrix Resin is intended for small penetrations such as bolts. Conditions and Limitations Note that this product is suitable for use only 101.6 mm (4”) or more above the finished system surface, except where complex details, such as bolt heads, cannot be properly sealed with a fleece-reinforced 2-component PMMA system, and must not be used where movement is expected (See Article 12.3.2.6. in the RGC Standards for Waterproofing Roofs and Grade-level Waterproofing) Technical Data Sheet Click the "PDF" icon to open the TDS in a new window.

Back to Accepted Materials

Home

© RCABC 2026
RoofStar^TM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Materials:ProMatrix (Siplast)

Materials:ProMatrix (Siplast)

Accept Terms Of Use